Course Information

  • Sessions 2 days
  • Duration 16 hrs
  • Level Beginner
  • Assessment 2 hrs

Venue

12 Woodlands Square #07-85/86/87 Woods Square Tower 1, Singapore 737715. 5 mins walk from Woodlands (NS9) MRT station.

The venue is disabled-friendly.

Skills Framework

TSC Title
System Integration
TSC Code
ICT-DIT-3016-1.1

Funding Validity

Funding for this course is valid from 10 Nov 2020 to 9 Nov 2026. Register and complete the course within this period to qualify for funding support.

Learning Outcomes

By end of the course, learners should be able to

  • LO1: Conduct assessment on robotics system integration using ROS
  • LO2: Utilise ROS tools and protocols
  • LO3: Test LIDAR and SLAM with ROS
  • LO4: Perform robotics system integration with ROS

Course Brochure

Certification

  • Certificate of Achievement from Tertiary Infotech Academy Pte Ltd - Upon meeting at least 75% attendance and passing the assessment(s), participants will receive a Certificate of Achievement from Tertiary Infotech Academy Pte Ltd.
  • OpenCerts from SkillsFuture Singapore - After passing the assessment(s) and achieving at least 75% attendance, participants will receive a OpenCert (aka Statement of Achievement) from SkillsFuture Singapore, certifying that they have achieved the Competency Standard(s) in the above Skills Framework.

WSQ - Fundamentals of Robot Operating System ROS for Beginners

Course Code: TGS-2020513213
  • WSQ
  • SFC
  • PSEA
  • UTAP
  • SFEC
  • Absentee Payroll
  • MCES
Share

What's This Course About

Eager to push the boundaries of robotics? Our WSQ System Integration with Robot Operating System (ROS) course is your stepping stone to creating robust and scalable robotic systems. Gain hands-on experience in sensor interfacing, middleware management, and ROS software development. From setting up simple actuator controls to orchestrating complex robotic behaviors, this course empowers you with the expertise to make significant contributions in the field of robotics.

But we go beyond basic system integration. Delve into advanced ROS topics, such as state machines, 3D perception, and multi-robot systems. Learn how to handle real-world challenges like system latency, data synchronization, and complex event handling. These skills not only make you proficient in ROS but also equip you to drive innovation in any robotics-related project. Whether you’re a seasoned engineer or a tech enthusiast, this course lays the foundation for your success in the ever-evolving world of robotics.

WSQ Funding

Full Fee $800.00 Before GST
GST $72.00 9% of fee
Baseline Nett $472.00 SG/PR age 21+ · 50% funded
MCES / SME Nett $312.00 SG age 40+ · 70% funded
SkillsFuture Enterprise Credit (SFEC)

Eligible companies can use their $10,000 SFEC to cover up to 90% of out-of-pocket course fees for classes ending on or before 30 Nov 2026. A redesigned SFEC starts on 1 Dec 2026.

View on SkillsFuture for Business

SkillsFuture Credit (SFC)

Eligible Singapore Citizens can use their SFC to offset course fee payable after funding but the $4,000 Additional SFC (Mid-Career Support) cannot be used.

Direct Application on SkillsFuture Portal

UTAP

Eligible NTUC members can apply for 50% of the unfunded fee from UTAP, capped up to $250/year and for members aged 40 and above, capped up to $500/year.

Submit UTAP Claim

PSEA

Eligible Singapore Citizens can use their PSEA funds to offset course fee payable after funding.

Check PSEA Eligibility

  • Scroll down to “Keyword Tags” to verify for PSEA eligibility.
  • If there is “PSEA” under keyword tags, the course is eligible for PSEA.

Once you are eligible for PSEA, please download and fill up the PSEA Withdrawal Form, then submit the completed form to us:

PSEA Withdrawal FormSubmit PSEA Form

Course FeeBefore Funding

$800.00 (GST-exclusive)
$872.00 (GST-inclusive)

Course Date

* Required Fields

Additional Note

Please bring your own laptop for hands-on training. If you don't have laptop, we can provide spare laptop for training use.

Post-Course Support

  • We provide free consultation related to the subject matter after the course.
  • Please email your queries to enquiry@tertiaryinfotech.com and we will forward your queries to the subject matter experts.

Cancellation & Reschedule Policy

  • You can register your interest without upfront payment. There is no penalty for withdrawal of the course before the class commences.
  • We reserve the right to cancel or re-schedule the course due to unforeseen circumstances. If the course is cancelled, we will refund 100% for any paid amount.
  • Note the venue of the training is subject to changes due to availability of the classroom.

Course Details

Course Details

What You'll Learn

Topic 1: Overview of System Integration with ROS

Introduction to Robot Operating System (ROS)

System Integration with ROS

Topic 2: Basic ROS Tools

ROS Workspace and Package

ROS Nodes and Launch

ROS Topics and Messages

Publishers and Subscribers Protocol

ROS Services and Actions

ROS Bags

Topic 3: LIDAR and SLAM

Overview of LIDAR and SLAM

Testing LIDAR system using ROS

Topic 4: Robotics System Integration

Overview ROS TF and URDF

ROS system Integration on a robot

Assessment

  • Written Exam
  • Practical Exam

Course Info

Minimum Entry Requirement

Knowledge and Skills

  • Able to operate using computer functions with minimum Computer Literacy Level 2 based on ICAS Computer Skills Assessment Framework
  • Minimum 3 GCE ‘O’ Levels Passes including English or WPL Level 5 (Average of Reading, Listening, Speaking & Writing Scores)

Attitude

  • Positive Learning Attitude
  • Enthusiastic Learner

Experience

  • Minimum of 1 year of working experience.
  • Minimum 18 years old

Minimum Software/Hardware Requirement

Software:

You will need the following for this course:

Hardware: Windows PC or Mac laptop

Funding Eligibility Criteria

Self-sponsored learners (individuals)

  • Singapore Citizens and Singapore Permanent Residents aged 21 and above.
  • Up to 50% course fee funding. Singapore Citizens aged 40 and above receive up to 70% under the Mid-career Enhanced Subsidy (MCES).
  • Singapore Citizens aged 25 and above can pay the remaining fee with SkillsFuture Credit.

Company-sponsored learners

  • Singapore Citizens and Singapore Permanent Residents who are direct employees of the sponsoring company.
  • Up to 50% course fee funding, or up to 70% for employees of SMEs (Enhanced Training Support for SMEs) and for Singapore Citizens aged 40 and above. An SME has no more than 200 employees or an annual turnover of no more than $100 million.
  • Employers can also claim Absentee Payroll funding for employees who attend during working hours.
  • Eligible companies can offset their out-of-pocket fees with SkillsFuture Enterprise Credit (SFEC).

Conditions for all funded learners

  • Attendance is taken digitally with Singpass for every session, including the assessment.
  • You must complete the course and pass all assessments (assessed as Competent).
  • If these conditions are not met, the funding is clawed back and the learner or employer pays the full course fee.
  • 9% GST is charged on the full course fee before funding.
  • Promo and discount codes cannot be used on funded courses.
  • Any balance after funding can be paid in cash, with SkillsFuture Credit, with PSEA (Singapore Citizens with a PSEA), or partly reimbursed by UTAP for NTUC members.

How to Apply SkillsFuture Credit Claim for Individuals

Singapore Citizens aged 25 and above can use their SkillsFuture Credit (base tier) to pay the course fee after funding. The $4,000 mid-career top-up cannot be used for this course.

  1. Register for this course as self-sponsored and tell us you will use SkillsFuture Credit. Do not pay the amount you plan to claim.
  2. We email you an invoice showing the course fee after funding.
  3. From 60 days before the course starts, and no later than the course start date, log in to MySkillsFuture with Singpass and click Claim credits.
  4. Click Submit a Claim and search for this course by its course code, TGS-2020513213.
  5. Select your class start date, enter the course fee payable after funding and the amount of credit to claim, then upload the invoice (PDF, JPG or PNG, under 4MB).
  6. Review, accept the terms and click Agree and Submit. The credit is paid directly to us; processing can take up to 14 working days.

Changing or withdrawing: cancel the claim on MySkillsFuture at least one day before the course starts. If your class date changes, cancel the claim and submit a new one with the new date.

How to Apply SkillsFuture Enterprise Credit (SFEC)

SFEC helps companies pay for employee training. The current SFEC ends on 30 November 2026, and a redesigned SFEC starts on 1 December 2026.

Current SFEC: classes ending on or before 30 November 2026

  • Eligible companies received a one-off $10,000 credit, notified by letter to their Corppass administrator. Eligibility generally required at least 3 Singapore Citizen or PR employees and Skills Development Levy contributions.
  • SFEC covers up to 90% of the company's out-of-pocket course fee after other subsidies.
  1. Check your company's SFEC eligibility and balance on EnterpriseSG.
  2. Register your Singapore Citizen or PR employee for a class that ends by 30 November 2026, as company-sponsored, and pay the course fee after funding.
  3. Your employee attends and completes the course. We submit the attendance and assessment results to SWDA.
  4. No separate claim is needed. SFEC is calculated automatically once the course fee grant is approved and is paid quarterly to your company's IRAS GIRO or PayNow Corporate account.

Any unused balance of the current SFEC expires on 30 November 2026.

Redesigned SFEC from 1 December 2026

Companies with at least 3 resident employees receive a fresh $10,000 in an online SFEC wallet that offsets out-of-pocket fees upfront at enrolment, instead of reimbursing them afterwards. SWDA has not yet published the support rates and claim steps; see OurWorkforce or our SFEC guide.

How to Apply UTAP (NTUC Members)

NTUC members can claim 50% of the unfunded course fee under the Union Training Assistance Programme (UTAP), capped at $250 a year (aged below 40) or $500 a year (aged 40 and above). The cap is shared with UTAP claims for AI tool subscriptions.

Eligibility: you must be an NTUC member paying full membership fees, with your membership paid up before and during the course and when you claim. The course must not be fully paid for by your employer or another source.

  1. Make sure your NTUC membership is paid up before the course starts.
  2. Register for this course with us and pay the course fee after funding and SkillsFuture Credit.
  3. Attend at least 75% of the course and sit all assessments.
  4. Within 6 months after the course ends, go to the NTUC U Portal, open UTAP under E-services, log in with Singpass and choose Course Fee Claim.
  5. Enter the nett course fee you paid (after all subsidies and SkillsFuture Credit, including GST), and upload your invoice or receipt and your certificate or result slip (PDF, JPG or PNG, up to 5MB each).
  6. NTUC usually pays the claim within 4 weeks of submission.

Read more in our UTAP guide.

How to Apply PSEA

Singapore Citizens with a Post-Secondary Education Account (PSEA), which stays open until around the year you turn 31, can use it to pay the course fee after funding for PSEA-approved courses. You can also use a sibling's PSEA after your own has been used up.

  1. Check that this course shows the PSEA tag on its MySkillsFuture page.
  2. Check your PSEA balance on MOE's Student Finance System with Singpass.
  3. Download and complete the PSEA withdrawal form, then submit it to us.
  4. We submit the withdrawal request to MOE. You (and your sibling, if you are using their account) authorise it in the Student Finance System. Nothing is withdrawn without this authorisation.
  5. MOE pays us directly. If you have already paid, we refund the amount covered by PSEA.

More details: MOE PSEA overview.

Appeal Process

If you disagree with an assessment decision, you have the right to appeal.

  1. When the assessor gives you feedback, say whether you agree with the outcome. If you agree, you and the assessor sign the Assessment Summary Record; if you disagree, do not sign it.
  2. Discuss the decision with the assessor or the assessment manager first.
  3. If you are still not satisfied, tell the assessor you intend to appeal. The assessor records this in the feedback section of the Assessment Summary Record and informs the assessment manager.
  4. Lodge your appeal within 7 days, giving your reasons, using the Candidate Appeal Form. The assessor can help you write and lodge it.
  5. An Assessment Appeal Panel reviews the information from you and the assessor and makes a decision. A record of the appeal and its outcome is kept.
  6. You will be told the outcome within 2 weeks of lodging the appeal. The panel's decision is final.

Job Roles

Job Roles

  • Robotics Engineer
  • ROS Developer
  • Automation Engineer
  • Robotics System Integrator
  • Robotics Researcher
  • Autonomous Vehicle Engineer
  • Drone Systems Developer
  • Robotic Manipulation Specialist
  • AI & Robotics Developer
  • Embedded Systems Engineer (with robotics focus)
  • Machine Vision Engineer
  • Mechatronics Engineer
  • Industrial Robot Programmer
  • Robot Simulation Specialist
  • IoT Engineer (with robotics applications).

Trainers

Trainers

Robotics brings together hardware, software and intelligence, and Mr Tan Woei Ming's background covers all three. He graduated with First-Class Honours in Electrical and Electronic Engineering from NTU and holds a Master of Intelligent Systems from NUS, so he is equally at home discussing sensor interfaces and embedded hardware as he is explaining how a robot builds a picture of its surroundings. Professionally, he was a Data Scientist and later Data Science Lead at Micron Technology, leading AI initiatives in predictive analytics, automation and process optimisation in the semiconductor and manufacturing industries. He is now an Instructor, Software Developer and Agentic Automation specialist at Tertiary Infotech, teaches Tertiary Courses' ROS, Arduino and IoT courses, and is an ACLP-certified trainer.

This WSQ course is a beginner's route into robotics system integration with ROS. Mr Tan starts with what ROS is and why it has become a common framework for integrating sensors, actuators and software on a robot. Learners then get hands-on with the basic ROS tools: workspaces and packages, nodes and launch, topics and messages, the publisher and subscriber pattern, services, actions and ROS bags for recording data. The third topic introduces LIDAR and SLAM, with learners testing a LIDAR system through ROS and seeing how a robot can map its environment while locating itself within it. Finally, the course covers ROS TF and URDF and brings everything together through system integration on a robot. Mr Tan explains each layer in plain terms, linking the software concepts to the physical hardware they control, and supports learners step by step so that newcomers to robotics finish with a working understanding of how a complete robotic system fits together.

Ken Yuen is an ACTA-certified trainer and STEM educator specialising in embedded systems, robotics and IoT. He has conducted WSQ and SkillsFuture courses in Arduino, Raspberry Pi, Jetson Nano and the Robot Operating System (ROS), training professionals and students in more than 50 schools and institutions. As a technical consultant at Anson Engineering he designed IoT monitoring and SCADA systems, giving him applied knowledge in robotics and automation. He has an electrical and electronics engineering background from NTU and is an MOE-registered instructor who has taught coding and robotics programmes in schools.

In WSQ - Fundamentals of Robot Operating System ROS for Beginners, Ken emphasises beginner-friendly, hands-on learning. He guides learners through ROS installation, workspaces and packages, nodes and launch files, topics and messages, publishers and subscribers, services, actions and ROS bags. Participants then test a LIDAR system and explore SLAM, before moving on to TF, URDF and integrating sensors with robotic platforms. By combining his STEM teaching experience with real-world technical projects, Ken ensures learners gain the confidence to apply ROS to build, integrate and control robotic systems.

Richard Wan is an ACLP-certified lecturer with more than 40 years of experience in software, hardware, embedded systems and computer vision, and has led advanced R&D initiatives in robotics, IoT and AI. A government scholar, he holds a Master's in Computer Vision and a Bachelor's in Electrical Engineering and Computer Science from the University of Wisconsin, Madison. He has co-founded multiple high-tech firms, including SGX-listed Mediaring Ltd and E-Book Systems. His ROS training bridges robotics theory with practical implementation in Python and C++.

In WSQ Fundamentals of Robot Operating System ROS for Beginners, Richard covers robot control, navigation and perception using ROS, paired with real-world examples in automation and computer vision. Learners start with an overview of system integration with ROS, then work with the basic ROS tools: workspaces and packages, nodes and launch files, topics and messages, publishers and subscribers, services, actions and bags. They test a LIDAR system and explore SLAM, before integrating a robotics system using ROS TF and URDF. With decades of technical and entrepreneurial experience, Richard ensures learners acquire the foundational knowledge and applied skills to work with ROS in robotics projects.

Review

Customer Reviews (65)

I enjoyed this concise learning. Thanks to the trainer for sharing. Review by Course Participant/Trainee
1. Do you find the course meet your expectation?
2. Do you find the trainer knowledgeable in this subject?
3. How do you find the training environment
Having face to face with actual hands will be good. However this will be difficult in such Covid times. (Posted on 11/30/2021)
will recommend Review by Course Participant/Trainee
1. Do you find the course meet your expectation?
2. Do you find the trainer knowledgeable in this subject?
3. How do you find the training environment
. (Posted on 9/19/2021)
might recommend Review by Course Participant/Trainee
1. Do you find the course meet your expectation?
2. Do you find the trainer knowledgeable in this subject?
3. How do you find the training environment
To ensure all equipments are well updated to prevent any delay. (Posted on 9/19/2021)
will recommend Review by Course Participant/Trainee
1. Do you find the course meet your expectation?
2. Do you find the trainer knowledgeable in this subject?
3. How do you find the training environment
. (Posted on 9/18/2021)
will recommend Review by Course Participant/Trainee
1. Do you find the course meet your expectation?
2. Do you find the trainer knowledgeable in this subject?
3. How do you find the training environment
. (Posted on 8/5/2021)

Items 51 to 55 of 65 total

per page
Page:
  1. 1
  2. ...
  3. 9
  4. 10
  5. 11
  6. 12
  7. 13

Write Your Own Review

You're reviewing: WSQ - Fundamentals of Robot Operating System ROS for Beginners

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
1. Do you find the course meet your expectation?
2. Do you find the trainer knowledgeable in this subject?
3. How do you find the training environment